KeyPrint KeyCast Resin - Violet - 1KG
210,00 CHF
Auf Lager
SKU
70273
KeyCast’s low shrinkage formula controls thermal expansion to yield porous-free and accurate castings. KeyCast is compatible with rapid burnout and gradual temperature ramp workflows, with no residual ash. It is used with chrome, cobalt, gold, and silver.
Casting Procedure and Recommendations
For best results Keystone recommends using Kerr “Satin Cast 20” or Ransom & Randolph “Ultra-Vest” investment material. This will ensure no adverse reactions between the casted part and investment material during the burnout process.
For best results, flasks should be vacuum or centrifuged to remove any air bubbles. Flasks should be bench cured for 2 hours prior to burnout.
Keystone recommends customers to allow >4mm of space between part edges and the outside edge of flask. This will ensure proper absorption of expansion during burnout.
Note: It is extremely important to hold the temperature ramp at 500°F (260°C) for at least one hour, depending on the flask size. This will ensure proper part dimensional stability.
| Vendor | Keystone Industries |
|---|---|
| Material type | KeyCast Resin |
| Size | 1kg |
Schreiben Sie eine Bewertung
